Accord V6-3.0L Hybrid (2005)
Voltage Converter: Service and Repair
PDU/DC-DC Converter Heatsink Air Duct Removal/Installation
PDU/DC-DC Converter Heatsink Air Duct Removal/Installation
NOTE: Put on gloves to protect your hands from electrical shock. IMA components are located in this area. The IMA is a high-voltage system. You
must be familiar with the IMA system before working on or around it. Make sure you have read the IMA service precaution before doing repairs or
service.
1. Remove the MPI module.
2. Remove the DC-DC converter.
3. Remove the A/C compressor driver.
4. Remove the bolts (A) and PDU/DC-DC converter heatsink air duct (B).
5. Install the parts in the reverse order of removal.
