honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Hybrid System Controls - IMA/MIL ON/ DTC P15A5 Set|Page 2544 > < Hybrid System - IMA Battery And Hardware Updates|Page 2539
Page 1
background image

Drive Motor Control Module: All Technical Service Bulletins
Hybrid System Controls - IMA/MIL ON/ DTC P15A5 Set

06-021

May 9, 2006

Applies To: 
2005 Accord Hybrid - ALL

IMA Indicator and MIL Are On With DTC P15A5

SYMPTOM

The IMA system indicator and the MIL are on with DIG P1 5A5 (motor current sensor circuit malfunction) stored.

PROBABLE CAUSE

During engine starting, the IMA motor control software incorrectly interprets the position of the IMA motor rotor.

CORRECTIVE ACTION

Update the IMA motor control software.

SOFTWARE INFORMATION

HDS Software Version: 2.003.020 or later

WARRANTY CLAIM INFORMATION

In warranty: 
The normal warranty applies.

Operation Number:

723507

Flat Rate Time:

0.3 hour

Failed Part:

P/N 37820-RCJ-A56 
H/C 7995269

Defect Code:

07201

Symptom Code:

03203

Template ID:

06-021A

Skill Level:

Repair Technician

Out of warranty: 
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.

DIAGNOSIS

Confirm that the vehicle has P1 5A5 stored in the IMA system.

^

If the vehicle has the latest software installed, follow the steps for DTC troubleshooting:

-

Refer to page 12-5 in the 2005-06 Accord Hybrid Service Manual, or

-

Online, enter keyword P15A5 and select DTC

Hybrid System Controls - IMA/MIL ON/ DTC P15A5 Set|Page 2544 > < Hybrid System - IMA Battery And Hardware Updates|Page 2539