Accord V6-3.0L Hybrid (2005)
7. Turn the ignition switch to ON (II) to keep the system awake and make these input tests at the appropriate connectors on the under-dash fuse/relay
box
-
If any test indicates a problem, find and correct the cause, then recheck the system
-
If all the input tests prove OK, go to step 8
Door Multiplex Control Unit
8. Remove the driver's door panel.
9. Disconnect the 23P connector from the door multiplex control unit.
10. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 11.
11. Reconnect the connector to the door multiplex control unit, and make these input tests at the appropriate connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
