Accord V6-3.0L Hybrid (2005)
Oil Filter: Service and Repair
Engine Oil Filter Replacement
Special Tools Required
Oil filter wrench 07HAA-PJ70101
1. Remove the oil filter with the oil filter wrench.
2. Inspect the filter to make sure the oil filter gasket is not stuck to the oil filter seating surface of the engine.
3. Inspect the threads (A) and oil filter gasket (B) on the new oil filter. Clean the seat on the engine block, then apply a light coat of new engine oil to
the oil filter gasket. Use only filters with a built-in bypass system.
4. Install the oil filter by hand.
5. After the rubber seal seats, tighten the oil filter clockwise with the oil filter wrench.