Accord V6-3.0L Hybrid (2005)
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.
DIAGNOSIS
Do the normal troubleshooting for DTC P0116 (ECT sensor range/performance problem):
^
Refer to the Fuel and Emissions section of the appropriate service manual or,
^
Online, enter P0116, then select DTC Troubleshooting: P0116 from the list.
-
If you find a problem, make the necessary repair. This bulletin does not apply.
-
If you do not find any problems, go to REPAIR PROCEDURE.
REPAIR PROCEDURE
Use the HDS with software version 2.005.004 or later to update the ECM/PCM PGM-FI software. Refer to Service Bulletin 01-023, Updating the
Control Units/Modules.
Disclaimer
