Accord V6-3.0L Hybrid (2005)
7. Turn ignition switch to ON (II) to keep the system awake and make these input tests at the appropriate connectors on the under-dash fuse/relay
box.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 8.
Door Multiplex Control Unit
8. Remove the driver's power window switch panel.
9. Disconnect the 23P connector from the power window master switch.
10. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 11.
