Accord V6-3.0L Hybrid (2005)
Seat Belt: Service and Repair
Rear Seat Belt
Rear Seat Belt Replacement
NOTE: Check the rear seat belts for damage, and replace them if necessary. Be careful not to damage them during removal and installation.
Rear Seat Belt
1. Remove the rear seat-back and rear seat cushion.
2. Remove the center anchor bolt (A).
3. Remove the rear shelf.
4. Remove the retractor mounting bolt (A) and the retractor bolt (B), then remove the rear seat belt (C) and retractor (D).
5. Install the seat belt in the reverse order of removal, and note these items:
-
Apply liquid thread lock to the anchor bolt before reinstallation.
-
Check that the retractor locking mechanism functions as described.
-
Before installing the anchor bolt, make sure there are no twists or kinks in the rear seat belt.
Center Belt and Seat Belt Buckles
1. Remove the rear seat-back and rear seat cushion.
2. Remove the center anchor bolts (A), and remove the seat belt buckles (B).
3. Remove the rear shelf.
