honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Alignment - Vehicle Pulls to the Right|Page 5894 > < Alignment - Vehicle Pulls to the Right|Page 5892
Page 11
background image

2.

Test-drive the vehicle at 55 mph on a road with very little crown. Use a stopwatch to determine how long the vehicle takes to make a complete
lane change.

^

If the vehicle takes 6 seconds or more to change lanes, the drift is normal. Return the vehicle to the customer, and explain that the drift is
normal.

^

If the vehicle takes less than 6 seconds to change lanes, go to REPAIR PROCEDURE.

REPAIR PROCEDURE

1.

Raise the vehicle on a hoist, and inspect the front suspension for any damage.

^

If there is any suspension damage, replace the damaged parts and check the wheel alignment.

^

If there is no suspension damage, go to step 2.

2.

Swap the front tires from side to side, and test-drive the vehicle as you did in the DIAGNOSIS.

^

If the vehicle now takes 6 seconds or more to change lanes, the drift is normal. Return the vehicle to the customer, and explain that the drift is
normal.

^

If swapping tires did not have an effect on vehicle lane-change time, go to step 3.

3.

Loosen the four 14 mm subframe bolts and the four subframe bracket bolts.

Alignment - Vehicle Pulls to the Right|Page 5894 > < Alignment - Vehicle Pulls to the Right|Page 5892