Accord V6-3.0L Hybrid (2005)
15. Measure voltage between PCM connector terminals A3 and E17.
Is there battery voltage?
YES - Substitute a known-good EPS control unit, and recheck.
NO - Go to step 16.
16. Turn the ignition switch OFF.
17. Jump the SCS line with the HDS.
18. Disconnect PCM connector E (31P).
19. Check for continuity between PCM connector terminal E17 and body ground.
Is there continuity?
YES - Repair short in the wire between the PCM (E17) and the EPS control unit.
NO - Update the PCM if it does not have the latest software, or substitute a known-good PCM, then recheck. If the symptom/indication goes away
with a known-good PCM, replace the original PCM.