Accord V6-3.0L Hybrid (2005)
Pressure Regulating Solenoid: Service and Repair
A/T Clutch Pressure Control Solenoid Valve A and B Replacement
A/T Clutch Pressure Control Solenoid Valve A and B Replacement
1. Get the customer's radio anti-theft code (navigation code), and write down the customer's audio presets.
2. Disconnect the negative terminal from the battery, then disconnect the positive terminal.
3. Remove the battery hold-down bracket, and remove the battery and battery tray.
4. Remove the intake air duct and air cleaner housing.
5. Remove the battery base.
6. Remove the nuts securing the shift cable bracket (A).
7. Remove the spring clip/washer (B) and the control pin (C), then separate the shift cable end (D) from the control lever (E).
8. Disconnect the connectors from the A/T clutch pressure control solenoid valve A, B, solenoid harness, transmission range switch, ATF
temperature sensor, output shaft (countershaft) speed sensor, input shaft (mainshaft) speed sensor, 3rd clutch transmission fluid pressure switch,
and 4th clutch transmission fluid pressure switch.
9. Remove the bolt securing the harness cover (A).
