Accord V6-3.0L Hybrid (2005)
Shift Interlock Solenoid: Service and Repair
Shift Lock Solenoid Replacement
1. Remove the center console.
2. Disconnect the shift lock solenoid connector (A), and remove it from the shift lever bracket base (B).
3. Remove the A/T gear position indicator panel light bulb socket (C).
4. Release the lock tab (D) securing the shift lock solenoid, and remove the shift lock solenoid.
5. Install the shift lock solenoid plunger (E) and plunger spring (F) in the new shift lock solenoid (G).
6. Apply silicon grease to joint of the shift lock solenoid plunger, if necessary.
7. Install the new shift lock solenoid by aligning the joint of the shift lock solenoid plunger with the tip of the shift lock stop (H).
8. Install the A/T gear position indicator panel light bulb socket.
9. Install the shift lock solenoid connector on the shift lever bracket base, then connect the connector.
10. Install the center console.
