Accord V6-3.0L Hybrid (2005)
18. Disconnect each solenoid valve connector.
19. Measure the resistance between each connector terminal of the shift solenoid valve and body ground.
Standard: 12 - 25 ohms
^
Replace the solenoid valve if the resistance is out of standard.
^
If the resistance is within the standard, go to step 20.
20. Connect the battery negative terminal to body ground, and connect the battery positive terminal to each solenoid terminal individually.
^
If a clicking sound is heard, go to step 21 and replace the solenoid harness.
^
If no clicking sound is heard, go to step 22 and replace the shift solenoid valve.
21. Remove the solenoid harness, and install a new O-ring (A) on the solenoid harness connector (B), and install the connector in the transmission
housing.