Accord V6-3.0L Hybrid (2005)
Shifter A/T: Service and Repair
Shift Lever Installation
Shift Lever Installation
1. Install the shift lever assembly.
2. Connect the shift lock solenoid connector (A) and park pin switch/A/T gear position indicator panel light connector (B), and install the harness
clamps (C) on the shift lever bracket base.
3. Turn the ignition switch ON (II), and verify that the R position indicator comes on.
4. If necessary, push the shift cable until it stops, then release it. Pull the shift cable back one step so that the shift position is in R. Do not hold the
