Accord V6-3.0L Hybrid (2005)
9. Install a new spindle nut (A), then tighten the nut. After tightening,, use a drift to stake the spindle nut shoulder (B) against the driveshaft.
10. Clean the mating surfaces of the brake disc and the front wheel, then install the front wheel with the wheel nuts.
11. Turn the front wheel by hand, and make sure there is no interference between the driveshaft and surrounding parts.
12. Tighten the flange bolts and the self-locking nut with the vehicle's weight on the damper.
13. Refill the automatic transmission with recommended automatic transmission fluid.
14. Check the front wheel alignment, and adjust it if necessary.
