Accord V6-3.0L Hybrid (2005)
NOTE:
3M Scotch-Weld DP-100 NS Adhesive is supplied in a dual syringe plastic Duo-Pak cartridge as part of the 3M Scotch-Weld EPX Applicator
system. To use:
^
Insert the Duo-Pak cartridge into the applicator.
^
Using light pressure on the trigger, start the plunger into the cylinders.
^
Remove the Duo-Pak cartridge cap; expel a small amount of adhesive, making sure both sides of the Duo pak cartridges are flowing evenly and
freely.
^
Attach the EPX mixing nozzle to the Duo-Pak cartridge.
^
Begin dispensing the adhesive.
5. Clean the retainer bonding surface with isopropyl alcohol, and let it dry, then apply an even coat of adhesive to the bonding surface of the clip.
6. Odyssey only: Position the retainers on the A-pillar in the same location as the original retainers.
