Accord V6-3.5L (2010)
Grille: Service and Repair
Front Grille Cover Replacement (2-Door)
Front Grille Cover Replacement
2-door
NOTE:
-
Take care not to scratch the front grille or the body.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
1. Remove the front grille cover (A).
1. Detach the clips (B, C).
2. Pass both hood edge cushions (D) through the holes in the cover by pulling up the rear edge of the cover, and slide the entire cover rearward to
release the front edge of it from under the front grille (E).
3. Pass the hood latch handle (F) through the hole in the cover.
NOTE: To release the clips, pry up on the center pin at the notch (G).
2. Install the cover in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips into place securely.
