Accord V6-3.5L (2010)
7. Repeat step 6 for each wheel until all four tire pressure sensor IDs are memorized. When all four sensor IDs are memorized, the low tire pressure
indicator blinks.
8. Turn the ignition switch to LOCK (0).
9. Disconnect the HDS from the DLC.
10. Test-drive the vehicle at 28 mph (45 km/h) or more for at least 1 minute.
11. Make sure the low tire pressure indicator does not blink.
12. Make sure the tires are inflated to the specified tire pressure listed on the doorjamb sticker.
13. Turn the ignition switch to LOCK (0).