Accord Coupe L4-2.2L SOHC (16 Valve) (1996)
Power Door Lock Actuator: Testing and Inspection
Driver's Door
Power Door Locks
Driver's Door Lock Actuator Test
1. Remove the door panel. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
2. Disconnect the 6-P connector from the actuator.
3. Check actuator operation by connecting power and ground
according to the table.
CAUTION: To prevent damage to the actuator, apply battery voltage only momentarily.
4. If the actuator fails to work properly, replace it.