Accord Coupe L4-2.2L SOHC (16 Valve) (1996)
2. Pry out the cover panel with a flat tip screwdriver, then remove it.
CAUTION: When prying with a flat tip screwdriver,
wrap it with protective tape to prevent damage.
3. Remove the nuts, then remove the mirror while holding it.
4. Installation is the reverse of the removal procedure.
Mirror Holder Replacement
Power mirror:
1. Insert a screwdriver in the mirror housing through the service hole, and loosen the actuator retaining screw.
2. Pull out the mirror holder from the mirror housing.