honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Power Unit <--> [Hydraulic Control Assembly - Antilock Brakes]|Removal and Installation|Page 5743 > < Power Unit <--> [Hydraulic Control Assembly - Antilock Brakes]|Removal and Installation
Page 2
background image

Fluid Level Indicator

1. Check whether the brake fluid level in the reservoir is at the MAX (upper) level. If level is low, add fresh brake fluid to the MAX (upper) level.

Proper Angle

2. Before installing the modulator unit on the vehicle, be sure to bleed the air from the suction port in the modulator unit by leaning the modulator

unit to one side slowly (about 45 degrees) as shown.

Power Unit <--> [Hydraulic Control Assembly - Antilock Brakes]|Removal and Installation|Page 5743 > < Power Unit <--> [Hydraulic Control Assembly - Antilock Brakes]|Removal and Installation