Accord Coupe L4-2.2L SOHC (16 Valve) (1996)
/Page-1515011.png)
12. Install the circlip in the groove, then remove the special tool.
NOTE: Check that the circlip is seated in the groove properly.
13. Coat a new piston seal with silicone grease and in stall it in the caliper.
14. Apply brake cylinder grease (P/N: 08733-BO2OE) or equivalent rubber grease to the sealing lips and inside of a new piston boot, and install it in
the caliper.
15. Coat the outside of the piston with brake fluid and install it on the adjusting bolt while rotating it clockwise with the special tool.
