Accord Coupe L4-2.2L SOHC (16 Valve) (1996)
Contention code:
B01
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your Zone Office. You
must request consideration, and get a decision, before starting work.
CORRECTIVE ACTION
Modify the fuel gauge sending unit.
1.
Wagon only: Remove the rear seat-backs, the spare tire lid, and the mid-floor cover. (Refer to service manual page 20-118.)
2.
Remove the fuel tank access panel. Disconnect the electrical connector.
3.
Remove the fuel gauge sending unit.
4.
Carefully flex the float arm to spread the coils. Place two 10 mm washers (see PARTS INFORMATION) between the coils.
5.
Reinstall the fuel gauge sending unit.
6.
Reconnect the electrical connector and install the access panel.
7.
Wagon only: Install the mid-floor cover, spare tire lid, and rear seat-backs.
PARTS INFORMATION
10 mm washer (two required):
P/N 94101-10000, H/C 0059113