Accord Coupe L4-2.2L SOHC VTEC (1995)
Balance Shaft Belt: Service and Repair
Installation
Install the timing belt and timing balancer belt in the reverse order of removal.
Only key points are described here.
-
When installing only the timing balancer belt, go to step 13.
NOTE: Clean the upper and lower covers before installation.
1. Remove the timing balancer belt drive pulley.
2. Set the timing belt drive pulley so that the No. 1 piston is at top dead center (TDC). Align the dimple on the tooth of the timing belt drive pulley
with the V pointer on the oil pump.
3. Set the camshaft pulley so that the No. 1 piston is at TDC. Align the TDC mark on the camshaft pulley with the back cover upper surface.