Accord Coupe L4-2.2L SOHC VTEC (1995)
NOTE:
-
Turn the crankshaft pulley so the No. 1 piston is at top dead center (TDC) before removing the belt.
-
Inspect the water pump.
-
The original radio has a coded theft protection circuit. Be sure to get the customer's code number before
-
disconnecting the battery.
-
removing the No. 39 (7.5 A) fuse from the under- hood fuse/relay box.
-
removing the radio.
After service, reconnect power to the radio and turn it on.
When the word "CODE" is displayed, enter the customer's 5-digit code to restore radio operation.
1. Disconnect the battery negative terminal first, then the positive terminal.
2. Remove the wheelwell splash shield.
3. Loosen the adjusting bolt and mounting nuts, then remove the power steering (P/S) pump belt.
4. Loosen the adjusting bolt, mounting bolt and locknut, then remove the alternator belt.
