Accord Coupe L4-2.2L SOHC VTEC (1995)
Air Bag(s) Arming and Disarming: Service and Repair
Air Bag Disarming and Arming
To avoid accidental deployment and possible Injury, always connect the protective short connectors on the driver's and front passenger's airbag
connectors before working near any SRS wiring.
NOTE: The original radio has a coded theft protection circuit. Be sure to get the customer's code number before disconnecting the battery cables.
1. Disconnect the battery negative cable, then disconnect the positive cable from the battery, and wait at least three minutes.
2. Connect the short connectors (RED) as follows:
Driver's Side:
-
Remove the access panel from the steering wheel, then remove the short connector (RED) from the panel.
-
Disconnect the 3-P connector between the driver's airbag and cable reel, then connect the short connector (RED) to the airbag side of the
connector.
