Accord Coupe L4-2.2L SOHC VTEC (1995)
4. Disconnect the SRS main harness 18-P connector from the SRS unit.
5. Remove the four Torx bolts from the SRS unit, then pull out the SRS unit from the passenger's side.
CAUTION:
-
Be sure to install the SRS wiring so that it is not pinched or interfering with other car parts
-
When tightening the Torx bolts to the specified torque after replacement, be careful to turn them in so that their heads rest squarely
on the brackets.
6. Install the new SRS unit.
