Accord DX Sedan L4-2254cc 2.3L SOHC MFI (2001)
Rocker Arm Assembly: Service and Repair
Rocker Arms and Shafts Inspection
Rocker Arms and Shafts Inspection
1. Measure the diameter of the shaft at the first rocker location.
2. Zero the gauge (A) to the shaft diameter.
3. Measure the inside diameter of the rocker arm, and check it for an out-of-round condition.
4. Repeat for all rockers and both shafts. If the clearance is over the limit, replace the rocker shaft and all overtolerance rocker arms. If any VTEC
intake rocker arm needs replacement, replace all three rocker arms in that set (primary, mid, and secondary).
