Accord EX Coupe L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-2632001.png)
Trunk / Liftgate Lock Cylinder: Service and Repair
1. Disconnect the cylinder rod (A) and cylinder switch connector (B), then detach the cylinder switch connector from the trunk lid.
2. Remove the bolt securing the lock cylinder. Then turn the trunk lid lock cylinder (A) 45 °, and remove it.
3. Install in the reverse order of removal, and note these items:
-
Make sure the connector is connected properly and the cylinder rod is connected properly.
-
Make sure the trunk lid opens properly and locks securely.
