Accord EX Coupe L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-2843001.png)
Actuator Cable: Service and Repair
Removal/Installation
1. Disconnect the 4P connector (A) from the actuator.
2. Loosen the two mounting bolts (B), and remove the actuator with the bracket.
3. Disconnect the vacuum hose (C).
4. Remove the three nuts (A).
5. Disconnect the actuator cable (B) from the actuator rod (C) by releasing the clip (D) from the rod with a screwdriver.
6. Loosen the locknut (A), then disconnect the actuator cable (B) from the throttle linkage (C).
7. Install in the reverse order of removal, and adjust the free play at the throttle linkage after connecting the actuator cable.
