Accord EX Coupe L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-608001.png)
Wheel Bearing: Service and Repair
Front Suspension
Special Tools Required:
-
Ball Joint Remover, 28 mm 07MAC - SL00200
-
Hub Disassembly/Assembly Tool 07GAF - SE00100
-
Attachment, 58 x 72 mm 07947 - 6340201
-
Bearing Driver Attachment 07965 - SA00600
-
Driver 07749 - 0010000
-
Support Base 07965 - SD90100
1. Loosen the wheel nuts slightly.
2. Raise the front of vehicle and make sure it is securely supported.
3. Remove the wheel nuts (A) and front wheel (B).
