Accord EX Coupe L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
Carburetor Cleaner:
P/N 08732-0006, H/C 4713673
or
Throttle Plate and Induction Cleaner:
P/N 08732-9009, H/C 6204945
REPAIR PROCEDURE
1.
Remove the breather tube from the air intake duct, unclip the vacuum lines from the duct, and remove the duct from the throttle body.
2.
Disconnect the TPS and MAP connectors from the throttle body.
3.
Remove the throttle cable and, if equipped, the cruise control actuator cable from the throttle body.
4.
Remove the throttle body mounting nuts and bolts, then slide the throttle body off its studs on the intake manifold chamber. Leave the coolant
hoses connected.
5.
Put a shop towel under the throttle body, open the throttle, then clean out any contaminants from the intake manifold side of the throttle body with
carburetor cleaner or throttle plate and induction cleaner.