Accord EX Coupe L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-2026003.png)
M/T
A/T
1. Check the hold-in coil for continuity between the S terminal (A) and the armature housing (ground). There should be continuity.
-
If there is continuity, go to step 2.
-
If there is no continuity, replace the solenoid.
2. Check the pull-in coil for continuity between the S terminal (A) and M terminal (B). There should be continuity.
-
If there is continuity, the solenoid is OK.
-
If there is no continuity, replace the solenoid.
