Accord EX Coupe L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
4.
Install a "B" collar over the shift control shaft with the inset facing the torque converter housing. The "B" collar has no grooves. [NEW]
5.
Temporarily install the control lever on the shift control shaft.
6.
Measure the clearance between the collar and the control lever with a feeler gauge.
[NEW]
Measurement
Action
Less than 0.10 mm (0.004 in.)
Go to step 7
Between 0.10 mm and 0.45 mm
Go to step 10
(0.004 in. and 0.018 in.)
More than 0.45 mm (0.018 in.)
Go to step 9
7.
Install collar "C" and remeasure the clearance. [NEW]
[NEW]
Measurement
Action
Less than 0.10 mm (0.004 in.)
Go to step 8
Between 0.10 mm and 0.45 mm
Go to step 10
(0.004 in. and 0.018 in.)
More than 0.45 mm (0.018 in.)
Reinstall collar "B" and recheck
your measurement
8.
Install collar "D" and remeasure the clearance. [NEW]
Measurement
Action
Less than 0.10 mm (0.004 in.)
Install a remanufactured transmission
[NEW]
Between 0.10 mm and 0.45 mm
*Go to step 10*