Accord EX Coupe L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-3196006.png)
adhesive.
15. Before filling a cartridge, cut a "V" in the end of the nozzle (A) as shown.
16. Pack adhesive into the cartridge without air pockets to ensure continuous delivery. Put the cartridge in a caulking gun, and run a bead of adhesive
(A) around the edge of the quarter glass (B) as shown:
-
After applying the adhesive, peel the separator off the butyl tape.
-
Apply the adhesive within 30 minutes after applying the glass primer. Make slightly thicker bead at each corner.
