Accord EX Coupe V6-3.0L (2001)
2002-04 models: Unplug the SRS main harness 4P connectors from the cable reel 4P connectors. Release the tab, and then remove the cable reel
from the column.
14.
Unplug the combination switch 14P connector and both wiper/washer 8P connectors. Remove the three screws from the combination switch
assembly, and then remove the combination switch from the steering column.
15.
Use a small, flat-tipped screwdriver to lightly dimple the shield in eight places as shown.
NOTICE
Do not press too hard with the screwdriver when dimpling the shield. The dimples should be deep enough to catch your fingernail on. If the dimples
are too deep, the steering effort will be too high and the steering column would have to be replaced.
16.
Reinstall the combination switch assembly, and secure it with the three original screws. Reconnect the combination switch 14P connector and both
wiper/washer 8P connectors.
