Accord EX Coupe V6-3.0L (2001)
Torque Converter Clutch Solenoid: Service and Repair
Replacement
NOTE: Torque converter clutch solenoid valve/shift solenoid valve A assembly must be removed/replaced as an assembly.
1. Remove the bolts securing the ignition coil bracket ('98-99 models), then remove the harness cover from the transmission hanger.
2. Remove the mounting bolts and torque converter clutch solenoid valve/shift solenoid valve A.
3. Clean the mounting surface and fluid passage of the torque converter clutch solenoid valve/shift solenoid valve A, and install a new torque
converter clutch solenoid valve/shift solenoid valve A with a new filter/gasket (B).
4. Install the harness cover on the transmission hanger, and install the ignition coil bracket bolts ('98-99 models).
5. Install the male terminal connector (C) of the solenoid connector on the harness cover.
6. Check the connector for rust, dirt, or oil, then reconnect the connector securely.
