Accord EX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Special Tools Required
-
Holder Handle 07JAB-001020A
-
Holder Attachment, 50 mm, Offset 07MAB-PY3010A
-
Socket, 19 mm 07JAA-001020A or a commercially available 19 mm socket
REMOVAL
1. Hold the pulley holder handle (A) and holder attachment (B).
2. Remove the bolt with a heavy duty 19 mm socket (C) and breaker bar.
INSTALLATION
1. Remove any oil from the pulleys (A), crankshaft (B), bolt (C), and washer (D). Clean and lubricate as shown.
2. Install the crankshaft pulley, and tighten the bolt to 245 Nm (25.0 kgf.m, 181 ft.lbs.). Do not use an impact wrench.