Accord EX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-2427004.png)
21. Disconnect the dashboard wire harness 16P connector (A) from the gauge assembly.
22. Check resistance between the No.6 terminal of the SRS main harness 18P connector and No.9 terminal of the dashboard wire harness 16P
connector; there should be 0 - 1.0 ohm.
Is the resistance as specified?
YES - Go to step 25.
NO - Go to step 28.
23. Disconnect the SRS main harness 3P connector (A) from the dashboard wire harness.
SRS Main Harness 3P Connector (Wire Side Of Female Terminals)
24. Check resistance between the No.1 terminal of the SRS main harness 3P connector and ground. There should be 1 M ohm or more.
Is the resistance as specified?
