Accord EX Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
16.
Insert the original lock cylinder shaft into the new lock cylinder body, then turn the key 90 degrees clockwise.
17.
With the roll pin notch on the inner collar facing up, slide the inner collar onto the lock cylinder shaft. Carefully install the new (long) roll pin
using the roll pin punch and a small hammer. Make sure the roll pin is centered.
18.
Turn the key to the LOCK (0) position, then remove it. Slide the lock cylinder body into the ignition switch body.