Accord LX Coupe L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
[NEW]
2.
Using a screwdriver, spread the clamp of the lower wire harness mounting bracket.
3.
Gently pull the wire wire harness down through the lower bracket until the excess slack is taken up. Be careful not to pull the wire harness too
tight.
[NEW]
4.
Using pliers, carefully re-crimp the lower bracket clamp. Leave a 1 mm gap between the clamp and the bracket.
5.
Reinstall the wheel, lower the vehicle to the ground, and confirm the wheel is not touching the wire harness.
6.
Check the other harness on the opposite side, and perform any needed repairs.
Reinstalling the Wire Harness Bracket
1.
Remove the wheel.