Accord LX Coupe L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-2414002.png)
1. Place the new driver's airbag (A) in the steering wheel, and secure it with new Torx bolts (B). Install the covers (C).
2. Connect the cable reel 2P connector (A) to the driver's airbag 2P connector (B), then install the access panel (C) on the steering wheel.
3. Connect the battery negative cable.
4. After installing the airbag, confirm proper system operation:
-
Turn the ignition switch ON (II); the SRS indicator light should come on for about six seconds and then go off.
-
Make sure both horn buttons work.
5. Enter the anti-theft code for the radio, then enter the customer's radio station presets.
