Accord LX Coupe L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-2418011.png)
6. Dispose of the complete airbag. No part of it can be reused. Place it in a sturdy plastic bag (A), and seal it securely.
Deployment Tool Check Procedure
Deployment Tool Check
1. Connect the yellow clips to both switch protector handles on the tool; connect the tool to a battery.
2. Push the operation switch : green means the tool is OK; red means the tool is faulty.
3. Disconnect the battery and the yellow clips.
Disposal of Damaged Airbag
Special Tool Required
Deployment tool: ....................................................................................................................................................................................... 07HAZ-SG00500
Before scrapping any airbags or side airbags (including those in a whole vehicle to be scrapped), the airbags or side airbags must be deployed. If the
vehicle is still within the warranty period, before deploying the airbags or side airbags, the Honda District Technical Manager must give approval and/or
special instruction. Only after the airbags or side airbags have been deployed (as the result of vehicle collision, for example), can they be scrapped.
If the airbags or side airbags appear intact (not deployed), treat them with extreme caution. Follow this procedure.
1. If installed in a vehicle, follow the removal procedure of driver's airbag , front passenger's, and side airbag.
2. In all cases, make a short circuit by twisting together the two airbag inflator wires.
3. Package the airbag in exactly the same packaging that the new replacement part come in.
4. Mark the outside of the box "DAMAGED AIRBAG NOT DEPLOYED" "DAMAGED SIDE AIR BAG NOT DEPLOYED" so it does not get
confused with your parts stock.
5. Contact your Honda District Service Manager for how and where to return it for disposal.
Seat With Side Airbags
Seat with a side airbag have a tag attached to the seat- back. Because the component parts (seat-back cover, cushion, etc.) of seats with and without
airbags are different, make sure you install only the correct replacement parts.
