Accord LX Coupe L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
_mfi/Page-2444003.png)
Dashboard Wire Harness 3P Connector (Terminal Side Of Male Terminals)
14. Connect a voltmeter between the No. 1 terminal (+) of the dashboard wire harness 3P connector and body ground.
15. Turn the ignition switch ON (II), and measure voltage.
Is there 8.5 V or more for six seconds after the ignition switch has been turned ON (II)?
YES - Short to power in the BLU wire of the dashboard wire harness; repair the harness.
NO - Go to step 16.
16. Turn the ignition switch OFF.
17. Disconnect the battery negative cable, and wait three minutes.
18. Disconnect the driver's and front passenger's airbag connectors (A).
