Accord LX Coupe L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
2. Remove the carrier bearing (A) with a commercially-available bearing puller (B) and bearing separator (C).
3. Install the new bearings with the special tool and a press. Press each bearing on until it bottoms. There should be no clearance between the
bearings and the carrier.
4. Inspect the bearing preload.
OIL SEAL REPLACEMENT
Special Tools Required
-
Driver 07749-0010000
-
Driver Attachment 07GAD-PG401 00
-
Pilot 28 x 30 mm 07JAD-PH80400
-
Driver Attachment 07JAD-PH801 01
1. Remove the differential assembly.
2. Remove the oil seal (A) from the transmission housing (B).