Accord LX Coupe V6-3.0L (2001)
4. Scribe a line (A) across the regulator (B) and sector gear (C).
5. Using a Torx T20 bit, remove the screws, then separate the power window motor and regulator (B).
6. Grease the moving portions of the regulator (A) indicated by the arrows.
7. Install the glass and regulator in the reverse order of removal, and note these items:
-
Roll the glass up and down to see if it moves freely without binding.
-
Make sure that there is no clearance between the glass and glass run channel when the glass is closed.
-
Adjust the position of the glass as necessary.
