Accord LX Coupe V6-3.0L (2001)
the hose.
-
If the pressure did not rise, replace the fuel pressure regulator, and recheck the fuel pressure.
-
If the pressure rose, and all your readings were within spec, go to step 10.
-
If the pressure rose, but your readings were out of spec, check for these problems:
-
If the pressure is too low, check for a clogged fuel filter and for leaks in the fuel lines.
-
If the pressure is too high, check for a pinched or clogged fuel return hose or line.
10. Reconnect the vacuum hose, remove the pressure gauge, and reinstall the fuel pulsation damper with a new washer.Tighten the fuel pulsation
damper to 22 N.m (2.2 kgf.m, 16 lbf.ft).
NOTE: Disassemble and clean the fuel pressure gauge attachment thoroughly after use.
