Accord LX Coupe V6-3.0L (2001)
Interior Lighting Module: Testing and Inspection
Control Unit Input Test
1. Before testing the entry light control functions, troubleshoot the multiplex control system.
Multiplex Control Unit, Driver's:
2. Remove the driver's multiplex control unit from the driver's under-dash fuse/relay box, and disconnect its connector.
3. Inspect all connector and socket terminals to be sure they are making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If all terminals look OK, go to step 4.
4. With the driver's unit still disconnected, make these input tests at the fuse/relay box socket.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 5.
Multiplex Control Unit, Passenger's:
5. Remove the passenger's multiplex control unit from the passenger's under-dash fuse/relay box, and disconnect its connector.
6. inspect all connector and socket terminals to be sure they are making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
