Accord LX Coupe V6-3.0L (2001)
Shift Solenoid: Service and Repair
Shift Solenoid A/Torque Converter Clutch Solenoid
Replacement
1. Remove the ATF cooler hose (outlet line) at the ATF cooler line. Turn the end of the cooler hose up to prevent ATF from flowing out, then plug
the line and hose.
2. Remove the ATF cooler line (outlet line) from the transmission housing.
3. Remove the mounting bolts and the A/T clutch pressure control solenoid valves A and B (A).
4. Clean the mounting surface and fluid passage of the A/T clutch pressure control solenoid valves A and B and the transmission housing.
5. Place the new gasket (B) on the transmission housing, then install the 8 x 18 mm ATF feed pipe (C), 8 x 26 mm pipe (D) and 8 x 36 mm pipe (E)
with their filter side into the transmission housing.
6. Install the new O-rings (F) over the feed pipes, and install the 8 x 40 mm ATF feed pipe (G).
7. Install the new A/T clutch pressure control solenoid valves A and B and harness clamp bracket (H).
8. Check the A/T clutch pressure control solenoid valve connectors for rust, dirt, or oil, then connect them securely.
9. Install the ATF cooler line (outlet line), and connect the ATF cooler hose to the cooler line.