Accord LX Coupe V6-3.0L (2001)
14. Glue the fasteners (A, B) to the inside face of the rear window as shown. If necessary, apply primer (3M N-200, or equivalent) to the areas where
the window antenna terminal base (C) will be glued, then glue the base on:
-
Be sure the fasteners (and window antenna terminal base cover) line up with the alignment marks (D).
-
Be careful not to touch the rear window where adhesive will be applied.
15. Apply the adhesive tape (A) (3M 4216, or equivalent) to the edge of the rear window (B)..
-
Be sure the adhesive tape lines up with the alignment marks (C).
-
Be careful not to touch the rear window where adhesive will be applied.