Accord LX Sedan L4-2156cc 2.2L SOHC MFI (1997)
Front Door Window Motor: Testing and Inspection
Driver Side
Motor Test:
1. Remove the driver's door panel.
Driver's Window Motor Test
2. Disconnect the 4-P connector from the motor.
Driver's Window Motor Test
3. Test the motor in each direction by connecting battery power and ground according to the table.
CAUTION: When the motor stops running, disconnect one lead immediately.
4. If the motor does not run or fails to run smoothly, replace it.
Pulser Test:
5. Connect the test leads of an analog ohmmeter to the No. 1 and No. 2 terminals.
6. Run the motor by connecting power and ground to the No. 3 and No. 4 terminals. The ohmmeter needle should move back and forth alternately.